​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​Technical Bulletins

​Download helpful technical bulletins for the application and installation of Senergy wall systems and products.

​EIFS

• ​Acceptable Sealants to use with Senergy Wall Systems​​
  
• Application of Channeled Adhesive CI Design in Elevated Temperatures
  
• Code Compliance of Senerflex Classic PB, Secondary Weather Barrier and Senturion EIFS
  
• ​Senturion Systems Methods of Attachment​
  
• The Importance of Properly Backwrapping Drainage EIFS​
  
• ​​The Importance of Using the Proper Notched Trowel with EIFS
  
• Platinum CI Neopor GPS Plus Supplementary Fasteners
  
• Senerflex Classic PB over Corrugated Metal Panels
  
• Senerflex Vulcan NC (US) Installation Guide​
  
• The Use of Dark Colors with EIFS​

Air/Water-Resistive Barriers

• Acceptable Sealants for use with Senershield-R/-RS/-VB​
  
• Case Study: Senershield-R at Fort Bliss​
  
• Spray Application of Senershield-R/-RS/​-VB​
  
• Fastener Self-Sealing for Senershield Air/Water-Resistive Barriers​
  

Masonry Veneer Systems

• Masonry Veneer Systems Mortar - Types, Definitions and Uses Technical Bulletin​
  
• Masonry Veneer Systems Efflorescence​​
  
• Channeled Adhesive CI Design with MaxGrip Veneer Mortar System Testing​​
  
• Resurfacing EIFS with Adhered Masonry Veneer​​
  
• Insulated Masonry Veneer System Test Study on Seismic and Racking Performance​
  
• Insulated Masonry Veneer System Test Study on Short-Term Deflection Performance​​
  

​​​​Stucco

• Accepted Stucco Wall Systems Lath and Trim Accessories​
• Cracks in Cement Plaster Stucco
  
• ​ Cement-Board Stucco 1000 Trim Accessories
  
• Senergy Stucco Systems Acceptable Stucco Bases​
  
• ​Water-Resistive Barrier Requirements for Cement Plaster Stucco

​​​Platinum CI Stucco

• Guidelines for Attaching Sika Facades Insulated (CI) Stucco to Framing​
• ​Platinum CI Stucco Non-Combustible Construction​
  
• Platinum CI Stucco Systems Key Detail Considerations​​​

EIFS Resurfacing​

• ​Basics of Conducting Adhesion Testing​​​
• ​​​Procedure for Cleaning EIFS and Stucco​
• Procedure for Sealant Joint Maintenance and Repair in EIFS​
• Procedure for Coating over Acrylic and Elastomeric Finishes
• Procedure for Repairing EIFS
• Procedure for Resurfacing EIFS
• Procedure for Reattachment of EIFS​​​​​​​​
• CI Solutions for Renovation of Brick and Masonry​

​​​​​​Stucco Resurfacing

• ​​​​Basics of Conducting Adhesion Testing​​​
• ​​​Procedure for Cleaning EIFS and Stucco​
  
• Procedure for Coating over Acrylic and Elastomeric Finishes
• Procedure for Repairing Stucco
• Procedure for Resurfacing Stucco​

​​​Best Practices

• Application of Textured Acrylic Finishes in Indoor Pool and Spa Areas
  
• Cracks in Cement Plaster Stucco​
  
• Critical Light and Tips to Minimize Aesthetic Irregularities
  
• Coatings Spray Equipment Recommendations​
  
• Tenting and Cool Weather Application of Acrylic and Cementitious Materials​
  
• Tips for Optimizing Performance of Sealant Joints within Sika Facades Systems
  
• ​Maintenance, Cleaning and Repair Guidelines for Senergy Wall Systems and Finish​
• Prevention and Treatment of Efflorescence
  
• The Use of Dark Colors with EIFS​
  

​​Special Interest

• Application of Finishes over Acceptable Substrates
• Warranty Issuance Instructions
• ​Wash Off of Uncured Coatings and Finishes​
  
• Sealants and Wall Systems Warranty​