MaxFlash®
A one-component elastomeric material for use as a flexible flashing membrane. It can also be used to prepare sheathing joints for subsequent application of Senershield® air/water-resistive barrier membranes.
Product Highlights |
|
|
|
|
|
|
Uses
MaxFlash can be used as a membrane for flashing rough openings, small penetrations and as a detailing compound for preparing sheathing joints for application of an air/water-resistive barrier membrane. Acceptable substrates include poured concrete/unit masonry, ASTM C1177 sheathings including DensGlassTM exterior sheathing, DensElementTM, eXPTM sheathing, GlasRoc sheathing, SecurockTM glass-mat sheathing, Weather DefenseTM Platinum sheathing, GreenGlass sheathing, PermaBaseTM cement-board by National Gypsum and other cement-boards (ASTM C1325 Type A Exterior) Exposure 1 or exterior plywood sheathing (grade C-D or better), Exposure 1 OSB, gypsum sheathing (ASTM C79 / ASTM C1396) pressure or fire retardant treated wood, steel and aluminum.
Packaging
20 oz. propack
20 propacks per case
Approximate Coverage
35 – 60 lineal feet per propack when applied at 20 mils to 1-inch on each side of the sheathing joint.
12-20 square feet per propack when applied at 20 mils to rough openings.
