Senershield-R
Senershield-R is a one-component fluid-applied vapor permeable air/water-resistive barrier. Waterproof and resilient, it may be spray-, roller-, trowel-, or brush-applied directly to approved wall substrates. Senershield-R can be applied in temperatures as low as 25°F (-4°C) and rising.
It provides excellent secondary moisture protection behind most wall claddings including EIFS, stucco (slip sheet required), brick, siding and metal panels. Listed in the ICC ESR-2986.
FEATURES | BENEFITS |
Meets ICC-ES AC212 water-resistive barrier tests | One fully qualified air/water-resistive barrier material for the entire building |
Meets requirements of ICC-ES AC 148 | Can be used as a flexible flashing in rough openings or through-wall penetrations |
Meets ASTM D 1970 Nail Sealability Requirements | Self-sealing |
Approved for Senergy Wall Systems | Full system warranty with Senergy EIFS and stucco wall claddings |
Liquid-applied, continuously-bonded membrane; eliminates seams, lap joints and staples | Transfers wind loads directly to the substrate |
One component, water-based, very low VOC content | Safe for workers and the environment, low odor, easy application |
Nonflammable as applied | Promotes workplace safety |
Compatible with lightweight, low-cost spray equipment | Fast, easy economical application |
No primer required | Single pass application on most substrates |
Uses
Senershield-R is used as a vapor permeable air/water-resistive barrier over the following exterior wall substrates:
Senershield-R should not be used for below grade applications or on surfaces subject to water immersion. Senershield-R complies with the air barrier impermeability requirements of the Massachusetts Energy Code.
- ASTM C1177 type sheathings, including DensGlass™ exterior sheathing, e²XP™ sheathing, GlasRoc® sheathing, Securock™ glass-mat sheathing, Weather Defense™ Platinum sheathing, GreenGlass® sheathing
- PermaBase™ brand cement board by National Gypsum (or other ASTM C1325 Type A Exterior approved cement boards)
- Untreated Exposure I or exterior plywood sheathing (grade C-D or better)
- Untreated Exposure I OSB
- Gypsum sheathing (ASTM C79/ASTM C1396)
- Poured concrete/unit masonry
