Please login with your username and password.


Can’t remember your accounts password?

Can't access your account?

Please select your language

This page is available in the following languages:

    Please select your country


    StuccoBase is a factory-blended mixture of Portland cement, reinforcing fibers, and other proprietary ingredients. StuccoBase conforms to ASTM C926, the standard specification for application of Portland cement-based stucco. It is listed in Intertek CCRR 0230 and CCRR 0249 for use with PermaLath 1000.

    As we continue the integration with Sika Corporation, please use this Product Name Cross Reference Guide​ to look up the previous Master Builders Solutions product name and the new SikaWall product name. Please contact us​​ if you have any questions.​​​​



    ​Superior weathering properties

    ​Long-term durability

    ​Proprietary formulation

    ​Improved moisture resistance and low water absorption

    ​Fiber reinforced

    ​Resists shrinkage cracking when properly cured

    ​Needs only addition of water and sand

    ​Easy to mix and use with consistent results

    ​Concentrated for use with local sand

    ​Economical stucco application


    StuccoBase is designed for use with the Senergy Stucco Wall System. Acceptable substrates include:
    • Concrete or unit masonry
    • Dens-Glass™ exterior sheathing (ASTM C1177)
    • Fiberock Aqua-Tough™ Sheathing
    • Water-resistant core gypsum sheathing (ASTM C79/ASTM C1396)
    • Cement-board (ASTM C1325 Type A Exterior) at a minimum 1/2 inch thickness
    • Fiberboard ANSI/AHA A 194-85
    • Plywood complying with US DOC PS 1-95
    • Expanded polystyrene insulation board complying with ASTM C578 Type IV with nominal density 1.5 lbs/ft³ extruded polystyrene
    • Oriented strand board (OSB), complying with US DOC PS 2-95


    36.3 kg (80 lbs) per bag.
    StuccoBase is a concentrate which requires the addition of 90.7–108.9 kg (200–240 lbs) of plaster sand conforming to ASTM C144 or ASTM C897 and 18.9–22.7 liters (5–6 gallons) of potable water.


    Coverage varies depending upon surface conditions and application technique.
    Typically 7.43–8.36 m² (80–90 ft²) per 80 lb bag at a thickness of 3/8" to 1/2".​
    StuccoBase Product Bulletin

    StuccoBase Product Bulletin

    Additional Downloads


    Material Safety Data Sheets