Please login with your username and password.


Can’t remember your accounts password?

Can't access your account?

Please select your language

This page is available in the following languages:

    Please select your country

    ​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​Senerlastic Plus Finish

    Senerlastic Plus Finish is a siliconized, factory-mixed, 100% acrylic-based, textured elastomeric finish that provides excellent flexibility, weatherability, and maximum resistance to mildew growth.



    ​Silicone enhanced

    ​Resists airborne pollutants and increases both water repellency and resistance to mold and mildew; cleans easier

    ​Bridges and seals non-moving hairline cracks up to 1/32"

    ​A component of a stucco repair system on the basis of its protective characteristics

    ​100% Acrylic polymer chemistry 

    ​Long-term durability and weather resistance

    ​Integral color

    ​Reduced maintenance and recoating

    ​Weather resistant

    ​Repels water and resists wind-driven rain

    ​High UV resistance

    ​Resists fading

    ​Abrasion resistant



    ​Doesn't blister, peel or flake


    Senerlastic Plus Finish is primarily intended for use as a finish over non-textured exterior wall surfaces such as cured stucco, concrete and unit masonry. Senerlastic Plus Finish can also be used to provide an aesthetically pleasing surface color and texture for poured concrete, Senergy Cement-Board Stucco and all Senergy Surfacing Systems, conventional stucco, Senergy Stucco Wall System. Elastomeric finishes should not be applied indoors. UV-light is required for curing.


    5 gallon pail (19 liter pail)


    Coverage rates may vary depending on the porosity of substrate and application techniques. Approximate coverages:

    • Classic Finish: 125 to 135 ft2 (11.6 to 12.5 m2)
    • Fine Finish: 125 to 135 ft2 (11.6 to 12.5 m2)
    • Sahara Finish: 105 to 115 ft2 (9.8 to 10.7 m2)
    • Texture Finish: 
    • Smooth finish application: Approximately 365 - 375 ft2 (33.9 to 34.8 m2) per coat, per pail (minimum 2 coats)
    • Skip trowel application: Approximately 150 to 160 ft2 (13.9 to 14.9 m2) per pail​

    Colors & Textures

    Available in Senergy’s standard colors and custom colors, in Senergy’s Classic, Fine Sahara and Texture Finishes.
    Senerlastic Plus Finish Product Bulletin

    Senerlastic Plus Finish Product Bulletin

    Additional Downloads

    Aesthetic Rendering Tool Teaser Image

    Aesthetic Rendering Tool